Fuel Cells
World-leading fuel cell performance at the world's lowest cost
 When looking to procure larger-scale fuel cells for product development or system integration, you are likely to find the best possible value at Horizon Fuel Cell Technologies. We offer the widest range of standard "off-the-shelf" PEM fuel cell systems today from 10W to 5kW (deliverable within 1 to 4 weeks), as well as customized fuel cell system configurations up to 30kW. Our standard systems are simple, efficient, and feature some of the highest power densities available in the world - opening new possibilities for integration and commercialization.
The Horizon Fuel Cell advantage:
*Comparison based on the 1.2kW NEXA system from Ballard.
Our standard systems specifications below will guide you through our off-the-shelf product line. For more information or if you would like a configuration not listed here, please contact us at stacks@horizonfuelcell.com
Lower cost
High efficiency
Lighter weight
Smaller size
Simple to use
Easy to integrate
Reduced peripherals
Increased reliability
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................13
Rated power.......................................................12W
Rated Performance..... .............................7.8V@1.5A
Purging valve voltage.............................................6V
Blower voltage.......................................................5V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................55°C(131°F)
Hydrogen pressure.................................0.45-0.55Bar
Humidification....................................Self-humidified
Cooling..............................Air (integrated cooling fan)
Stack Weight (with fan & casing)................275g(±30g)
Stack Size............................75x47x70mm(3x1.8x2.8in)
Flow rate at max output..............................0.18L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time.................≤30s(ambient temperature)
Efficiency of system..........................40% at full power
Semi-integrated 12W fuel cell system
Including:
•Integrated fan and casing
•12W stack with blower
|
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
Type of fuel cell....................................................PEM
Number of cells......................................................13
Rated power.......................................................20W
Rated Performance..... .............................7.8V@2.6A
Purging valve voltage.............................................6V
Blower voltage.......................................................5V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................55°C(131°F)
Hydrogen pressure.................................0.45-0.55Bar
Humidification....................................Self-humidified
Cooling..............................Air (integrated cooling fan)
Stack Weight (with fan & casing)................275g(±30g)
Controller weight.........................................90g(±10g)
Stack Size............................75x47x70mm(3x1.8x2.8in)
Flow rate at max output..............................0.28L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time.................≤30s(ambient temperature)
Efficiency of system..........................40% at full power
Semi-integrated 20W fuel cell system
Including:
•Miniature electronic valve
•Control electronics
•Integrated fan and casing
•Low pressure protection
•20W stack with blower
|
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
Type of fuel cell....................................................PEM
Number of cells......................................................14
Rated power.......................................................30W
Rated Performance..... .............................8.4V@3.6A
Purging valve voltage.............................................6V
Blower voltage.......................................................5V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................55°C(131°F)
Hydrogen pressure.................................0.45-0.55Bar
Humidification....................................Self-humidified
Cooling..............................Air (integrated cooling fan)
Stack Weight (with fan & casing)................280g(±30g)
Controller weight.........................................90g(±10g)
Stack Size............................80x47x75mm(3.1x1.8x3in)
Flow rate at max output..............................0.42L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time.................≤30s(ambient temperature)
Efficiency of system..........................40% at full power
Semi-integrated 30W fuel cell system
Including:
•Miniature electronic valve
•Control electronics
•Integrated fan and casing
•Low pressure protection
•30W stack with blower
|
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
Type of fuel cell....................................................PEM
Number of cells......................................................24
Rated power......................................................100W
Rated Performance..... ............................14.4V@7.2A
Hydrogen supply valve voltage..... ........................12V
Purging valve voltage............................................12V
Blower voltage......................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure.................................0.45-0.55Bar
Humidification....................................Self-humidified
Cooling..............................Air (integrated cooling fan)
Stack Weight (with fan & casing)................960g(±50g)
Controller weight.......................................400g(±30g)
Stack Size.....................130x112x95mm(5.1x4.4x3.7in)
Flow rate at max output................................1.4L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time.................≤30s(ambient temperature)
Efficiency of system.................................40% @14.4V
Low voltage protection.........................................12V
Over current protection........................................12A
Over temperature protection..............................65°C
External power supply.........................13V( ±1V), ＜5A
Semi-integrated 100W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•100W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................48
Rated power.....................................................200W
Rated Performance..... ...........................28.8V@7.2A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure.................................0.45-0.55Bar
Humidification....................................Self-humidified
Cooling..............................Air (integrated cooling fan)
Stack Weight (with fan & casing)............1550g (±50g)
Controller weight......................................400g(±30g)
Stack Size....................215x112x95mm(8.5x4.4x3.7in)
Flow rate at max output...............................2.8L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system...................................40% @28V
Low voltage protection........................................24V
Over current protection.......................................12A
Over temperature protection.............................65°C
External power supply........................13V( ±1V), ＜5A
Semi-integrated 200W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•200W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................72
Rated power.....................................................300W
Rated Performance..... ..............................43.2V@7A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Stack Weight (with fan & casing)............2050g (±50g)
Controller weight......................................400g(±30g)
Stack Size....................280x112x95mm(11x4.4x3.7in)
Flow rate at max output...............................4.2L/min
Hydrogen purity.............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system................................40% @43.2V
Low voltage protection........................................36V
Over current protection.......................................12A
Over temperature protection.............................65°C
External power supply........................13V( ±1V), ＜5A
Semi-integrated 300W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•300W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................36
Rated power.....................................................500W
Rated Performance..... ............................21.6V@24A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Stack Weight (with fan & casing)............2800g (±50g)
Controller weight......................................400g(±30g)
Stack Size..................215x125x180mm(8.5x4.9x7.1in)
Flow rate at max output..................................7L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time...................≤30s(ambient temperature)
Efficiency of system................................40% @21.6V
Low voltage protection........................................18V
Over current protection.......................................30A
Over temperature protection.............................65°C
External power supply........................13V( ±1V), ＜5A
Semi-integrated 500W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•500W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................72
Rated power...................................................1000W
Rated Performance..... ............................43.2V@24A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Stack Weight (with fan & casing)...........4.5kg (±100g)
Controller weight......................................400g(±30g)
Stack Size................215x125x300mm(8.5x4.9x11.8in)
Flow rate at max output................................14L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system................................40% @43.2V
Low voltage protection........................................36V
Over current protection.......................................30A
Over temperature protection.............................65°C
External power supply......................13V( ±1V), 5A-8A
Semi-integrated 1000W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•1000W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................48
Rated power...................................................2000W
Rated Performance..... ............................28.8V@70A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Weight (with fan & casing)...........about 10000 grams
Controller weight..................................2500g(±100g)
Stack Size..............approx. 40.4cm x 18.3cm x 32.7cm
Flow rate at max output................................29L/min
Hydrogen purity.............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system................................40% @28.8V
Low voltage protection........................................24V
Over current protection.......................................90A
Over temperature protection.............................65°C
External power supply.......................13V( ±1V), 5A-8A
Semi-integrated 2000W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•2000W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................72
Rated power...................................................3000W
Rated Performance..... ............................43.2V@70A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Weight (with fan & casing)...........about 15000 grams
Controller weight..................................2500g(±100g)
Stack Size...............approx. 40.4cm x 18.3cm x 44.9cm
Flow rate at max output................................42L/min
Hydrogen purity..............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system................................40% @43.2V
Low voltage protection........................................36V
Over current protection.......................................90A
Over temperature protection.............................65°C
External power supply.......................13V( ±1V), 5A-8A
Semi-integrated 3000W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•3000W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells....................................................120
Rated power...................................................5000W
Rated Performance..... ...............................72V@70A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................24V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-30°C(41-86°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Weight (with fan & casing)...........about 30000 grams
Controller weight..................................2500g(±100g)
Stack Size..............approx. 40.4cm x 21.2cm x 69.2cm
Flow rate at max output................................70L/min
Hydrogen purity.............................≥99.995% dry H2
Start up time..................≤30s(ambient temperature)
Efficiency of system...................................40% @72V
Low voltage protection........................................60V
Over current protection.......................................90A
Over temperature protection.............................65°C
External power supply.....................24V( ±1V), 8A-12A
Semi-integrated 5000W fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•5000W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
|
|
H-12 |
H-20 |
H-30 |
H-100 |
H-200 |
H-300 |
H-500 |
H-1000 |
H-1000XP |
H-2000 |
H-3000 |
H-5000 |
|
Type of fuel cell....................................................PEM
Number of cells......................................................50
Rated power...................................................1000W
Rated Performance..... .............................30V@33.3A
Hydrogen supply valve voltage..... .......................12V
Purging valve voltage...........................................12V
Blower voltage.....................................................12V
Reactants........................................Hydrogen and Air
Ambient temperature........................5-35°C(41-95°F)
Max stack temperature............................65°C(149°F)
Hydrogen pressure................................0.45-0.55Bar
Humidification...................................Self-humidified
Cooling.............................Air (integrated cooling fan)
Stack Weight (with fan & casing)............Approx.3.6kg
Controller weight..................................Approx.1.9kg
Stack Size................264x197x117mm(10.4x7.8x4.6in)
Flow rate at max output.............................13.5L/min
Hydrogen purity...............................≥99.995% dry H2
Start up time......................................................≤30s
Efficiency of system.....................48% @30V LHV (net)
Low voltage protection........................................25V
Over current protection.......................................50A
Over temperature protection.............................68°C
Start up battery...................................................12V
Semi-integrated 1kW fuel cell system
Including:
•Connections/Tubing
•Electronic valves
•Electronic control box
•1000W stack with blower
•Fuel cell ON/OFF switch
•SCU ON/OFF switch |
 |
